UD-700-X2 Universal LED Dimmer ISYGLT

Description

UD-700-X2 Universal LED Dimmer ISYGLT

The reliable universal dimmer is designed to dim all light sources (e.g. LED lamps) that can be dimmed via leading edge/trailing edge. It requires no minimum load and dims flicker-free from just one LED retrofit lamp. Even a large number of LEDs is no problem for the dimmer. 

Two separate dimmer outputs are available, each of which can be loaded with 700W. By configuration and parallel switching of the outputs, the dimmer is loadable with 1x1400W.

Each channel can be individually parameterized for the corresponding load type (leading edge/trailing edge mode). The dimmer automatically checks the connected load by performing a short test after first switching on the operating voltage to verify that the connected load can be used with the desired setting.

The dimmer operates with an internal dimming resolution of 16 bits and thus meets the highest requirements.

The properties set in the presets such as dimming curves, minimum and maximum limits can be changed and optimized by the user. 

Detailed specifications - CLICK HERE

Features

• ISYGLT BUS protocol
• DMX512 8Bit and 16Bit
• stand-alone: 0-10V, 1-10V, push button (single-button dimmer)
• internal potentiometers
• With the ISYGLT or DMX512 BUS protocols, the internal potentiometers and voltage inputs can be configured as priority, merging mode or for BUS interference
• 2 channels each 700W or 1 channel 1400W
• flicker free dimming of LED-lamps
• Automatic load detection
• Suppression of ripple signals and mains interference
• Oscilloscope function
• DMX, ISYGLT
• 1-10V / 0-10V
• dimmable with one button

DMX

STAND ALONE